Winder Tread Or Step Minimum Therefore the minimum required width of the stair is measured from the point along the tread that is a minimum 6 inches in depth and the tread must have a minimum required depth of 10 inches at the walkline which is located 12 inches from the inside of the turn. another thing to note regarding the above code section is the tolerance it gives. In spiral stairways, the minimum winder tread depth at the walking is reduced to 6.75 inches at the walkline. the maximum riser height is 9.5 inches and the minimum clear width is 26 inches for spiral stairs. and finally, curved stairways must comply with the ibc 1011.5.2 requirements, plus the inner radius of the stair must be at least twice.
Minimum Stair Tread Depth For Winder Inside Edges Building Codes Winder treads shall have a minimum tread depth of 10 inches (254 mm) measured as above at a point 12 inches (305) mm from the side where the treads are narrower. winder treads shall have a minimum tread depth of 6 inches (152 mm) at any point. within any flight of stairs, the greatest winder tread depth at the 12 inch (305 mm) walk line shall. Building codes mandate stairs should be at least 36 inches wide. this width is great for three winders to make a turn of 90 degrees. this means each winder stair creates a 30 degree angle. the center of the winder tread is always going to be greater than 10 inches if the stairs are 36 inches wide. this is plenty safe. Maximum 4 1 2 inch handrail projection into stairway width, on either side. minimum 6′ 8″ headroom height clearance for stairway. maximum 12′ 7″ vertical height (rise) for a flight of stairs. maximum 7 3 4 inch stair riser height. minimum 10 inch stair tread depth with nosing or minimum 11 inches with no nosing. Within any flight of stairs, the largest winder tread depth at the walkline shall not exceed the smallest winder tread by more than 3 8 inch (9.5 mm). consistently shaped winders at the walkline shall be allowed within the same flight of stairs as rectangular treads and shall not be required to be within 3 8 inch (9.5 mm) of the rectangular.
Winder Tread Or Step Minimum House Staircase Loft Stairs Staircase Maximum 4 1 2 inch handrail projection into stairway width, on either side. minimum 6′ 8″ headroom height clearance for stairway. maximum 12′ 7″ vertical height (rise) for a flight of stairs. maximum 7 3 4 inch stair riser height. minimum 10 inch stair tread depth with nosing or minimum 11 inches with no nosing. Within any flight of stairs, the largest winder tread depth at the walkline shall not exceed the smallest winder tread by more than 3 8 inch (9.5 mm). consistently shaped winders at the walkline shall be allowed within the same flight of stairs as rectangular treads and shall not be required to be within 3 8 inch (9.5 mm) of the rectangular. R311.7.5.2.1. winder treads. winder treads shall have a tread depth of not less than 10 inches (254 mm) measured between the vertical planes of the foremost projection of adjacent treads at the intersections with the walkline. winder treads shall have a tread depth of not less than 6 inches (152 mm) at any point within the clear width of the stair. Winder treads shall have a minimum tread depth of 11 inches (279 mm) between the vertical planes of the foremost projection of adjacent treads at the intersections with the walkline and a minimum tread depth of 10 inches (254 mm) within the clear width of the stair.
Winder Stair Requirements Explained Building Code Trainer R311.7.5.2.1. winder treads. winder treads shall have a tread depth of not less than 10 inches (254 mm) measured between the vertical planes of the foremost projection of adjacent treads at the intersections with the walkline. winder treads shall have a tread depth of not less than 6 inches (152 mm) at any point within the clear width of the stair. Winder treads shall have a minimum tread depth of 11 inches (279 mm) between the vertical planes of the foremost projection of adjacent treads at the intersections with the walkline and a minimum tread depth of 10 inches (254 mm) within the clear width of the stair.
How To Winder Stairs
Curved Stairway With Winder Treads Inspection Gallery Internachi
Comments are closed.