Thermostat Wires Explained These control the power, heat and fan. standard thermostats use 4 or 5 wires: r, w, g, y, and sometimes c. these control the power, heat, fan, and cooling. more advanced thermostats use 6 8 wires. the extra wires control additional hvac system features and settings, signaling a two stage cooling or heat pump system. Learn what the letters on your thermostat's wiring mean and how they control your hvac system. find out how to connect the r, g, y, w, o, b, x, aux, e, and other wires correctly.
Thermostat Wiring Explained Yellow – the yellow wire connects to your compressor. green – the green wire connects to the fan. orange – this wire connects to your heat pump (if you have one). red – now, there can be two separate wires for this. one is for cool and the other is for heat, hence the abbreviation “rh” and “rc”. blue – this is your common or. Here’s how to wire a thermostat using the color code and, fyi, each terminal’s purpose. attach the red wire to the r terminal (call for heating and or cooling). attach the green wire to the g terminal (fan). attach the white wire to the w terminal (heat). attach the yellow wire to the y terminal (ac). The wires commonly include red (r), white (w), green (g), yellow (y), and blue (c) wires. the extra wire, often the c wire (common), provides a continuous 24 volt power supply to the thermostat, eliminating the need for battery power. this ensures consistent thermostat operation and enables more advanced features like wi fi connectivity and. Connect the new thermostat. place the plate of your new thermostat against the wall where it will be located. check the plate with a level, and mark the screw holes with your pencil. if applicable, drill guide holes before adding anchors to the wall. pull the wires through the opening of the thermostat’s backplate.
Ac Thermostat Wiring Diagram Explained For Hvac The wires commonly include red (r), white (w), green (g), yellow (y), and blue (c) wires. the extra wire, often the c wire (common), provides a continuous 24 volt power supply to the thermostat, eliminating the need for battery power. this ensures consistent thermostat operation and enables more advanced features like wi fi connectivity and. Connect the new thermostat. place the plate of your new thermostat against the wall where it will be located. check the plate with a level, and mark the screw holes with your pencil. if applicable, drill guide holes before adding anchors to the wall. pull the wires through the opening of the thermostat’s backplate. The most common configuration of a 4 wire thermostat is: red, r wire: this carries the 24v power supply and is responsible for the functioning of the thermostat and communicating with the hvac system. insert it into the r or rc terminal. white, w wire: this is the heating wire and signals the heating system. Unscrew the two wires from the terminals. remove the motherboard of the old 2 wire thermostat and put the new 2 wire thermostat in its place. reconnect the red and white wire, tighten down the set screw, and put the control panel back on. test the 2 wire thermostat wiring by turning the furnace on.
Comments are closed.