Socket Weld Flange Dimensions Asme B16 5 Asme b16.5 provides specific tolerances for socket weld flanges, which are designed for small size high pressure piping. these tolerances ensure proper fit, alignment, and sealing capability within the piping systems. socket weld flanges have a recessed area where the pipe is inserted before being welded around the outer diameter. Find the dimensions of socket weld flanges for different classes and sizes in inches and millimeters. see the tables for outer diameter, flange thickness, hub diameter, socket depth, bolt size and more.
Socket Weld Flanges And Stud Bolts Dimensions Asme B16 5 Nps 1 2 Diameter of contact face. 1.6 mm raised face = ± 0.8 mm. 6.35 mm raised face. tongue and groove male female. ± 0.4 mm. studs are measured parallel to the axis (l) from the first to the thread without the chamfers (points). s = free threads equals 1 3 time bolt dia. hex bolts are measured from under the head to the top of de bolt. Notes class 400 socket weld flanges may be provided in nps 1 2 to 2 1 2 using class 600 dimensions dimension b corresponds to the pipe inside diameter. values quoted assume 40s standard wall thickness. Asme b16.5 2017. (1) this dimension is for the large end of the hub, which may be straight or tapered. taper shall not exceed 7 deg on threaded, slip on, socket welding, and lapped flanges. (2) when these flanges are required with flat face, the flat face may be either the full tf dimension thickness plus 0.06 in. or the tf dimension thickness. *b: bore diameter of 150# sw flange, which is equal to that of a welding neck flange of same size or corresponds to the inside diameter of pipe as given in asme b36.10 for standard wall pipe unless otherwise specified by purchaser; j:bore diameter of the socket; d: depth of socket; y: length through hub; all units are mm.
Socket Welding Flanges 150 Lbs Dimensions Thepipingmart Blog Asme b16.5 2017. (1) this dimension is for the large end of the hub, which may be straight or tapered. taper shall not exceed 7 deg on threaded, slip on, socket welding, and lapped flanges. (2) when these flanges are required with flat face, the flat face may be either the full tf dimension thickness plus 0.06 in. or the tf dimension thickness. *b: bore diameter of 150# sw flange, which is equal to that of a welding neck flange of same size or corresponds to the inside diameter of pipe as given in asme b36.10 for standard wall pipe unless otherwise specified by purchaser; j:bore diameter of the socket; d: depth of socket; y: length through hub; all units are mm. Ansi b16.5 class 150 covers dimensions for weld neck flanges from 1 2" to 24" nominal pipe size diameter. lap joint flanges to be used with short or long type stub end with suitable facing. ansi b16.5 class 150 flange dimensions for weld neck, slip on, blind, threaded, socket weld and lap joint type flanges from 1 2 inch up to 24 inches nominal. *b: bore diameter of 300# sw flange, which is equal to that of a welding neck flange of same size or corresponds to the inside diameter of pipe as given in asme b36.10 for standard wall pipe unless otherwise specified by purchaser; j:bore diameter of the socket; d: depth of socket; y: length through hub; all units are mm.
Socket Weld Flange Ss Swrf Flange Socket Weld Reducing Flange Ansi b16.5 class 150 covers dimensions for weld neck flanges from 1 2" to 24" nominal pipe size diameter. lap joint flanges to be used with short or long type stub end with suitable facing. ansi b16.5 class 150 flange dimensions for weld neck, slip on, blind, threaded, socket weld and lap joint type flanges from 1 2 inch up to 24 inches nominal. *b: bore diameter of 300# sw flange, which is equal to that of a welding neck flange of same size or corresponds to the inside diameter of pipe as given in asme b36.10 for standard wall pipe unless otherwise specified by purchaser; j:bore diameter of the socket; d: depth of socket; y: length through hub; all units are mm.
Service Metal 150 Carbon Steel Socket Weld Flange
Socket Weld Flange Cl300 Asme B16 5 3 Inch Astm A105 Zizi
Comments are closed.