Remove Vinyl Fence Posts With Concrete Super Easy Youtube Expertsmadeeasy = how to become an internet marketing expert but now, easily remove broken vinyl fence posts, and the concrete too then install ne. In this video i show you how to remove a fence post in concrete, in under 5 minutes ! i have removed alot of fence posts being a fencing contractor and if y.
Removing Vinyl Fence Posts With Concrete Youtube Fence king. Connecting a 2×4 or 4×4 to the post with heavy duty bolts, then placing the jack underneath the bolted on section and lifting it. wrapping a chain or tow strap around the post and connecting it to the jack, then using it to pull the post out of the ground. connecting the jack to the post with ratchet straps or some other removable connector. Place a 4 inch layer of sand into the bottom of the hole. lower the concrete anchor on your post into the new hole with the help of your assistants. hold the level to each side of the vinyl post and adjust it to make it perfectly plumb, or vertical. fill the hole with concrete mix and water. check the plumb of the post and adjust it as necessary. Once you've located a good spot to pull from, wrap the tow chain around it, leaving some length at the tail end with the hook. place the jack right next to the post concrete. if you're working on soft ground, you may want to place it on a board that will distribute the load better and won't sink down. wrap the end of the chain around the jack.
Removing Vinyl Fence Post With Concrete Without Damaging The Vinyl For Place a 4 inch layer of sand into the bottom of the hole. lower the concrete anchor on your post into the new hole with the help of your assistants. hold the level to each side of the vinyl post and adjust it to make it perfectly plumb, or vertical. fill the hole with concrete mix and water. check the plumb of the post and adjust it as necessary. Once you've located a good spot to pull from, wrap the tow chain around it, leaving some length at the tail end with the hook. place the jack right next to the post concrete. if you're working on soft ground, you may want to place it on a board that will distribute the load better and won't sink down. wrap the end of the chain around the jack. Dig out posts manually. digging the earth from around the concrete foundation is the most popular method for removing resistant fence posts. you can accomplish this with just a basic shovel or spade and plenty of patience. you may do a few things to make this task go more smoothly. only remove the earth surrounding one face of the fence post. Let’s now take a quick look at each of the nine best ways to remove fence posts from the ground or concrete. 1. use a sledgehammer. if the fence post is anchored in loose ground or in a small piece of concrete, you may just be able to sledgehammer it out. if it is in soil, hit the fence post in the center with the sledgehammer to loosen it.
Comments are closed.