Lpg Conversion B1ha B1ka Youtube Walk through of the natural gas to lpg conversion on the b1ha & b1ka boilers.important this video is intended exclusively for licensed mechanical contracto. Part number 7637718 ng to lpg part number 7637719 lpg to ng. for use with: vitodens 100 w b1ha and b1ka. installation instructions. fuel conversion and labelling. refer to the installation and start up service instructions applicable to this boiler. ensure that main power to the equipment being serviced is off.
How To Convert A Vitodens 100 W B1ha B1ka To Lpgas Youtube Vitodens 100 w, b1ha series & b1ka combi technical data specifications technical data standard heating boiler boiler model no. b1ha 26, 94 b1ha 35, 125 b1ka 35, 125 csa input natural gas (ng) csa input liquid propane gas (lpg) csa output doe 1 heating capacity ng csa output doe 1 heating capacity lpg net ahri rating 2. Install the supplied tank temperature sensor a into the tank (in one of two locations). attach the (factory installed) tank temperature sensor connectors c into the (supplied) temperature sensor % connector a (as shown). refer to the “control connections” section of the b1ha b1ka installation and service instructions. On is 194°f (90°c). to minimize distribution losses, viessmann recommends that the heating and domestic hot water systems be based on a maximum boiler supply temperat. re of 158°f (70°c).due to the low return temperatures required for gas condensing, avoid the use of mixing valves in the heating circ. Page 66 additional information vitodens 100 w, b1ha series & b1ka combi installation service technical data (continued) standard heating boiler boiler model no. b1ha 26 b1ha 35 b1ka 35 csa input natural gas (ng) 21 94 21 125 21 125 6.2 27.5 6.2 36.6 6.2 36.6 csa input liquid propane gas (lpg) 31 94 31 125 31 125.
Viessmann Main Boiler Documentation Vitodens 100 W B1ha B1ka On is 194°f (90°c). to minimize distribution losses, viessmann recommends that the heating and domestic hot water systems be based on a maximum boiler supply temperat. re of 158°f (70°c).due to the low return temperatures required for gas condensing, avoid the use of mixing valves in the heating circ. Page 66 additional information vitodens 100 w, b1ha series & b1ka combi installation service technical data (continued) standard heating boiler boiler model no. b1ha 26 b1ha 35 b1ka 35 csa input natural gas (ng) 21 94 21 125 21 125 6.2 27.5 6.2 36.6 6.2 36.6 csa input liquid propane gas (lpg) 31 94 31 125 31 125. 7837262 lpg conversion kit (wb1c b1ha b1ka b1la b1lb)(30 35kw) lpg conversion kit for 30 35kw versions of boilers: vitodens 100 w wb1c combi & system;. Installation vitodens 100 w, b1ha series & b1ka combi technical data system layout 1 vitodens 100 w, b1ha 26, 35, 94, 125 with one heating circuit legend note: the use of a low loss header is recommended if the air vent water flow rate is less than 1.7 gpm (400 l h) or prv pressure relief valve more than 6.2 gpm (1400 l h).
Viessmann Main Boiler Documentation Vitodens 100 W B1ha B1ka Operating 7837262 lpg conversion kit (wb1c b1ha b1ka b1la b1lb)(30 35kw) lpg conversion kit for 30 35kw versions of boilers: vitodens 100 w wb1c combi & system;. Installation vitodens 100 w, b1ha series & b1ka combi technical data system layout 1 vitodens 100 w, b1ha 26, 35, 94, 125 with one heating circuit legend note: the use of a low loss header is recommended if the air vent water flow rate is less than 1.7 gpm (400 l h) or prv pressure relief valve more than 6.2 gpm (1400 l h).
Comments are closed.