Hyundai Santa Fe Dm Radiator Repair Procedures Cooling System

Hyundai Santa Fe Dm Radiator Repair Procedures Cooling System Hyundai santa fe dm 2013 2018 service manual engine mechanical system cooling system radiator. repair procedures. removal and installation. 1. disconnect the battery terminals. 2. remove the air cleaner assembly. 3. remove the under cover. 13. install the radiator cap and fill the reservoir tank to the "max (or f)" line with coolant. 14. run the vehicle under idle until the cooling fan operates 2 ~ 3 times. 15. stop the engine and wait coolant gets cool. 16. repeat 10 to 15 until the coolant level doesn't fall any more, bleed air out of the cooling system.

Hyundai Santa Fe Dm Radiator Components And Components Location Repair procedures. removal and installation 1. remove the over flow hose (a). 2. remove the reservoir tank (b). tightening torque: 7.8 ~ 11.7 n.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.6 lb ft) 3. install in the reverse order of removal. engine mechanical system. cooling system. Steps 10 ~ 12 are performed with the radiator cap off. 10. fill fluid mixture with coolant and water (5 : 5) (tropical region – 4:6) slowly through the radiator cap. push the upper lower hoses of the radiator so as bleed air easily. 11. start the engine and run until coolant circulates. when the cooling fan operates and coolant circulates. 2017 hyundai santa fe se 3.3l v6. replace reverse light. white light when you back up yup, they burn out and you can replace them with bright leds. 2017 hyundai santa fe se 3.3l v6. proper jumpstart procedure. learning how to jump your car before you need to is an excellent idea. 2017 hyundai santa fe se 3.3l v6. change a rear wiper blade. Replace the front turn signal. if your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb. 2013 hyundai santa fe gls 3.3l v6. replace brights. on many cars, the high beam bulb runs at reduced power during the day check 'em and change 'em! 2013 hyundai santa fe gls 3.3l v6. change an engine fuse.

Hyundai Santa Fe Dm Radiator Repair Procedures Cooling System 2017 hyundai santa fe se 3.3l v6. replace reverse light. white light when you back up yup, they burn out and you can replace them with bright leds. 2017 hyundai santa fe se 3.3l v6. proper jumpstart procedure. learning how to jump your car before you need to is an excellent idea. 2017 hyundai santa fe se 3.3l v6. change a rear wiper blade. Replace the front turn signal. if your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb. 2013 hyundai santa fe gls 3.3l v6. replace brights. on many cars, the high beam bulb runs at reduced power during the day check 'em and change 'em! 2013 hyundai santa fe gls 3.3l v6. change an engine fuse. If the valve lift is not as specified, replace the thermostat. water temperature control assembly. repair procedures. removal 1. disconnect the battery negative terminal. 2. loosen the drain plug and drain the engine coolant. 3. remove the radiator upper hose and lower hose. Other information: hyundai santa fe (tm) 2019 2024 owner's manual: system settings setting functions for the system with the engine on, select ‘driver assistance → driving convenience → auto highway speed control (or auto motorway speed control)’ from the settings menu to turn on navigationbased smart cruise control and deselect to turn off the system.