How To Remove The Transmission Oil Line Dodge Ram 1500

How To Remove The Transmission Oil Line Dodge Ram 1500 Dodge Ram 1500 Replacing the radiator of my dodge ram 1500 i run into the freaking line and of course i could not disconnect. i decided then to make this video so i can hel. How to disconnect transmission line on dodge, chrysler, jeep, fiatif you cannot remove or disconnect transmission line on your dodge, jeep, chrysler or fiat.

How To Change Transmission Fluid On Ram 1500 Carguideinfo 19mm wrench: fittings on transmission5 8 wrench: starter5 8 socket with extension: starter3 8 wrench: transmission line holder clip3 8 fuel ac line removal t. A c fuel line (quick connect) tools are required. the tool slides over the line and the flanged part fits into the recess to depress the spring around it. push the line all the way into the radiator. push the line tool in, and then pull the line and tool out together. oldhp and rogerramjet. Step 1 – drain transmission. the transmission transfer case and pan need to be drained before the pan is removed to change out the filters. disconnect the return line on the bottom of the transmission using a wrench. connect 3 8" hose to the outlet and other end to drain pan. start the car and shift into neutral. Remove the engine (1) to transmission (3) structural dust cover (2). remove the exhaust support bracket from the rear of the transmission. disconnect and lower or remove any necessary exhaust components. remove the starter motor. rotate crankshaft in clockwise direction until converter bolts are accessible. then remove bolts one at a time.

How To Change The Transmission Fluid In A Dodge Ram Youtube Step 1 – drain transmission. the transmission transfer case and pan need to be drained before the pan is removed to change out the filters. disconnect the return line on the bottom of the transmission using a wrench. connect 3 8" hose to the outlet and other end to drain pan. start the car and shift into neutral. Remove the engine (1) to transmission (3) structural dust cover (2). remove the exhaust support bracket from the rear of the transmission. disconnect and lower or remove any necessary exhaust components. remove the starter motor. rotate crankshaft in clockwise direction until converter bolts are accessible. then remove bolts one at a time. Support the rear end of the transmis­sion with a floor jack, then raise the trans­mission slightly to take the weight off the crossmember. 17. unbolt the transmission mounting bracket from the transmission and from the crossmember and remove the bracket. 18. unbolt and remove the transmission crossmember. 19. How to step 3. locate and loosen the transmission fluid fill plug. this is found on the passenger side, right rear of the transmission, and above the exhaust. before draining the ram 1500 transmission fluid, loosen and remove the fill plug in a counterclockwise direction using an 8mm hex bit socket and rachet.