Stained Glass Tutorial On Patina Get A Lovely Even Shine Brushing stained glass patina on to solder. with a q tip or cheap brush, apply the copper patina to the solder seams. don’t be mean with the patina, and make sure that you cover every last bit of the solder. dry thoroughly with paper towel. let the panel air dry before the final polish with wax. This video shows how and why to patinate a stained glass project. then, how to wax your project to seal the finish and to make it shine.***disclaimer: some l.
Stained Glass Tutorial On Patina Get A Lovely Even Shine In today's video we talk about how to prep your piece for patina application. this took me a year to narrow down the perfect methods for getting bright, shin. Step 1: dish soap wash. i use dawn, but you can use any dish soap you have on hand! this first wash is just to get it as clean as you can with soap and warm water. for this and step two you’ll want a scrub brush that can get into the crevices of your solder lines. simly get wet and soapy, and scrub!. Clean and prepare. wash with dish soap and water, then use distilled or filtered water for the final rinse to avoid minerals. or, spray on and wipe off kwik clean flux remover with no final rinse. clean solder lines with 0000 steel wool to remove oxidation and leave a shiny silver finish. First i cleaned the zinc well with 0000 steel wool. then i took an old towel and cut it into small 4 inch pieces. i poured some of the patina chemical into a small cup. wearing gloves, of course, i dipped the towel in the patina and rubbed it in one smooth stroke across the length of the zinc. i used a clean piece of towel each time i dipped.
Stained Glass Tutorial On Patina Get A Lovely Even Shine Clean and prepare. wash with dish soap and water, then use distilled or filtered water for the final rinse to avoid minerals. or, spray on and wipe off kwik clean flux remover with no final rinse. clean solder lines with 0000 steel wool to remove oxidation and leave a shiny silver finish. First i cleaned the zinc well with 0000 steel wool. then i took an old towel and cut it into small 4 inch pieces. i poured some of the patina chemical into a small cup. wearing gloves, of course, i dipped the towel in the patina and rubbed it in one smooth stroke across the length of the zinc. i used a clean piece of towel each time i dipped. So squirt some on and then towel it off. 3. next we need to clean the window even more thoroughly so that it will readily accept the patina. we apply kwik clean brand cleaner. it chemically removes flux that might remain on the lead we want to patina. so we squirt some on and then towel it off, getting it nice and dry. Patina and polish. june 16, 2018 122 comments. for a sparkling stained glass finish this stained glass tutorial exposes the myth of polish and wax. in i share expert tips on polishing, applying patina and waxing copper foiled projects. this is the last thing … (read more).
Comments are closed.