How To Check Your Coolant Level Youtube Thezebra this video is a step by step presentation of how to check your car's coolant level. coolant is a mixture of water and anti freeze wh. Check the car's radiator coolant level to prevent it from dropping damaging levels; learn how from our expert mechanic in this free car maintenance video.exp.
How To Check Your Cars Coolant Level Youtube Also check out:checking your tyre pressure and tread wear: watch?v=8vvk8ohmvbshow to change a flat tyre: watch?. Checking coolant level. 1. ensure the engine is cool and the vehicle is on level ground. park your vehicle on a level surface like a garage floor or flat driveway to make sure the coolant level can be accurately read. let your vehicle cool for at least 30 minutes to an hour to prevent burns from hot coolant. 2. Step 2: pop the hood and locate the radiator cap. open your car’s hood. almost all cars have their radiators located under the hood. once the hood is opened, look to the front of the engine bay. 1. inspect the surface of the coolant for signs of an oil leak. look for an oily film on the surface on the coolant. coolant can come in a variety of colors, including red, green, blue, and yellow. however, if the surface is dark or has an oily foam on the surface it may mean that there is a leak in your head gasket.
пёџhow To Safely Check Engine Coolant Level Easy To Follow Directions Step 2: pop the hood and locate the radiator cap. open your car’s hood. almost all cars have their radiators located under the hood. once the hood is opened, look to the front of the engine bay. 1. inspect the surface of the coolant for signs of an oil leak. look for an oily film on the surface on the coolant. coolant can come in a variety of colors, including red, green, blue, and yellow. however, if the surface is dark or has an oily foam on the surface it may mean that there is a leak in your head gasket. There will be markings on the side of the reservoir, and you’ll be able to see the coolant level through the plastic. if the liquid is at the “full” level, there’s nothing you have to do. if it’s below full, then you should remove the radiator cap and add enough coolant (or a mix of coolant and water) until it’s topped off. Method 1 – via the coolant reservoir. park the car on a flat surface and pop open the hood. 1. locate your coolant overflow reservoir. 2. you will see terms such as "full" and "low," which indicate how much coolant is in the system. 3. use a funnel to fill up the reservoir until it reaches the "full" status. 4.
Comments are closed.