Honda Fury Oil And Filter Change How To Youtube Today we’ll show you step by step how to change the oil and filter on a honda fury, including what tools and parts you’ll need.we’ll be using honda’s own ser. Links in description belowhow to change your oil on the honda fury 2010 2022 model years.amazon links for everything you need:oil filter:: amzn.to 3r.
Honda Fury Oil And Filter Change Youtube Here's how to honda fury shaft drive oil as per the instructions in honda's service manual changing the oil on a shaft drive motorcycle like the honda fury i. Hey guys, one more how to fury service video and article from me. this one is how to change the oil and filter on the honda fury as per honda's service manual. for those who like to read, you can find the full instructions here: how to change the oil and filter on a honda fury. for those would rather watch the video, here it is:. Step 2) remove the oil filter. the oil filter is also located by the kick stand. remove the oil filter using an adjustable oil filter wrench or a 65 14 oil filter wrench. if your honda fury uses a k&n oil filter you can use a 17mm bit to remove the oil filter. step 3) re install the drain plugs. Place new oil on finger and run a bead of oil on new filter's gasket. install new oil filter and hand tighten (don't use the wrench) pour 3.9 quarts of fresh, new oil in where you removed the dipstick. replace the dipstick and tighten. start the engine and allow to run for 3 minutes. shut off engine and wait 2 minutes.
Oil Change For Honda Fury Youtube Step 2) remove the oil filter. the oil filter is also located by the kick stand. remove the oil filter using an adjustable oil filter wrench or a 65 14 oil filter wrench. if your honda fury uses a k&n oil filter you can use a 17mm bit to remove the oil filter. step 3) re install the drain plugs. Place new oil on finger and run a bead of oil on new filter's gasket. install new oil filter and hand tighten (don't use the wrench) pour 3.9 quarts of fresh, new oil in where you removed the dipstick. replace the dipstick and tighten. start the engine and allow to run for 3 minutes. shut off engine and wait 2 minutes. Oil change watch that level! so i changed the oil today and ran into a slight issue that i wanted to pass along for awareness. for the last few oil changes (i change yearly around end of year) i have been using the larger oil filter instead of the standard one. its a kn 303 or hf 303 and is larger than stock and should allow for a 4 quart oil. Here’s how to change the shaft drive fluid on your honda fury in a few simple steps: open the shaft drive fill cap. remove the shaft drive drain bolt. replace the shaft drive drain bolt. refill with hypoid gear oil. replace the shaft drive fill cap. there are a few more details around torque and oil specifications, and replacing washers, but.
How To Change Honda Fury Shaft Drive Oil Youtube Oil change watch that level! so i changed the oil today and ran into a slight issue that i wanted to pass along for awareness. for the last few oil changes (i change yearly around end of year) i have been using the larger oil filter instead of the standard one. its a kn 303 or hf 303 and is larger than stock and should allow for a 4 quart oil. Here’s how to change the shaft drive fluid on your honda fury in a few simple steps: open the shaft drive fill cap. remove the shaft drive drain bolt. replace the shaft drive drain bolt. refill with hypoid gear oil. replace the shaft drive fill cap. there are a few more details around torque and oil specifications, and replacing washers, but.
Comments are closed.