Grainger Approved Push On Hose Fitting Fitting Material Brass X Brass Product details. max. working pressure @ 70 f. brass multipurpose push on barbed hose fittings provide good strength, ductility, and corrosion resistance. they are more heat resistant than 6061 t6 aluminum push on barbed hose fittings. they have raised ridges (or barbs) on one end that hold the fitting in place when it's pushed into a hose. Product details. max. working pressure @ 70 f. brass multipurpose push on barbed hose fittings provide good strength, ductility, and corrosion resistance. they are more heat resistant than 6061 t6 aluminum push on barbed hose fittings. they have raised ridges (or barbs) on one end that hold the fitting in place when it's pushed into a hose.
Grainger Approved Push On Hose Fitting Fitting Material Brass X Brass Push on hose barb,1 4 in id x 1 4 m. item # ggs5a252. mfr. model # 5a252. ehc: ehc : view more. sds document not found. for assistance please contact the sds coordinator by email at [email protected]. catalogue page # 2441. Find your approved vendor push on hose fitting, hose barb x npt, ¼ x ¼ in fitting, male x male, rigid, straight at grainger canada, formerly acklands grainger. we have been canada's premiere industrial supplier for over 125 years with superior service and quality. Product description. brass multipurpose push on barbed hose fittings provide good strength, ductility, and corrosion resistance. they are more heat resistant than 6061 t6 aluminum push on barbed hose fittings. they have raised ridges (or barbs) on one end that hold the fitting in place when it's pushed into a hose, creating a leak resistant. Assembly instructions. 1 lubricate insert. 2 hold hose at angle as shown & push on and up over. first barb. 3 continue to push straight on until hose is seated under. protective plastic cap. keep hands back from hose end. area so that hose can expand. disassembling instructions.
Grainger Approved Push On Hose Fitting Fitting Material Brass X Brass Product description. brass multipurpose push on barbed hose fittings provide good strength, ductility, and corrosion resistance. they are more heat resistant than 6061 t6 aluminum push on barbed hose fittings. they have raised ridges (or barbs) on one end that hold the fitting in place when it's pushed into a hose, creating a leak resistant. Assembly instructions. 1 lubricate insert. 2 hold hose at angle as shown & push on and up over. first barb. 3 continue to push straight on until hose is seated under. protective plastic cap. keep hands back from hose end. area so that hose can expand. disassembling instructions. Brass barbed hydraulic hose fittings are resistant to heat, rust, and corrosion from water, acids, and minerals. they are more malleable than steel barbed hydraulic hose fittings, making them easier to install. they have threads on one end and raised ridges (or barbs) on the other end that grip the inside of hoses to hold them in place and form. 1 cut hose cleanly and squarely to length. 2 slide clamp on hose. 3 lubricate hose. push hose on fitting until hose bottoms against stop ring or hex. 4 position hose clamp as shown below and secure with a screwdriver or wrench. maintain “a” dimension noted below for proper clamp positioning. brass hose barb tee.
Comments are closed.