Checking The Level And Adding Coolant Hyundai Elantra J5 Md

Checking The Level And Adding Coolant Hyundai Elantra J5 Md The coolant level should be filled between f and l marks on the side of the coolant reservoir when the engine is cool. if the coolant level is low, add enough distilled (deionized) water. bring the level to f, but do not overfill. if frequent additions are required, see an authorized hyundai dealer for a cooling system inspection. Check the condition and connections of all cooling system hoses and heater hoses. replace any swollen or deteriorated hoses. the coolant level should be filled between the max (f) and the min (l) marks on the side of the coolant reservoir when the engine is cool. if the coolant level is low, add enough distilled (deionized) water to bring the.

Checking The Level And Adding Coolant Hyundai Elantra J5 Md If it's cold and still at minimum, you may want to add a bit, then keep an eye on it. make sure you get the right kind. don't overfill. if after you fill it, it gets low again quickly you may have a leak or blown head gasket. it is most likely just at minimum from the factory though. that was taken when it was cold. For more info visit us at: 1aau.to h bga in the video, 1a auto shows how to check and fill the coolant level. the video is applicable to the 07, 08, 0. Fifth generation (md ud; 2011–2016) hyundai elantra md 2010 2015 owners manual maintenance engine coolant checking the coolant level recommended engine coolant when adding coolant, use only deionized water or soft water for your vehicle and never mix hard water in the coolant filled at the factory. Parts and consumables:coolantragsnotes:it is advisable to check the liquid level in the expansion ta. hyundai. elantra. md [2010 2017] petrol. md [2010 2017].

Checking The Level And Adding Coolant Hyundai Elantra J5 Md Fifth generation (md ud; 2011–2016) hyundai elantra md 2010 2015 owners manual maintenance engine coolant checking the coolant level recommended engine coolant when adding coolant, use only deionized water or soft water for your vehicle and never mix hard water in the coolant filled at the factory. Parts and consumables:coolantragsnotes:it is advisable to check the liquid level in the expansion ta. hyundai. elantra. md [2010 2017] petrol. md [2010 2017]. Turn off the engine and allow it to cool down. pop the hood open by pulling the hood release under the hood. find your coolant reservoir on the side of the engine and check the level by looking at the side of the container. you should see a min and max line. if the level is below the minimum level, open the filler cap and add coolant to bring. Created on: 2019 06 17 watch this video to learn how to check the coolant level on your 07 10 hyundai elantra, and top if off, if necessary.