The Magnificent Mopar 413 And 426 Max Wedge Engines The following year the max wedge was given a displacement boost to 426 cubic inches, which was good for another 15 to 25 hp, depending on how the engine was ordered. the wedge was one of the rowdiest mopar v8 motors ever built, with its aggressive cam and octane seeking compression ratio of up to 13.5:1, and it forced both ford and general. The 413 and 426 max wedge engines continued to be made in 1964. in the heyday of 1962 64, you could get these engines in any b body chrysler product. that included the dodge 330 or 440, the polara and polara 500, and the plymouth savoy, belvedere, fury, or sport fury. the 1964 max wedge 426 was essentially the same as the 1963 engine, except.
Engine Month Today Is 413 Day Celebrate Mopar S Max Wedge Hot Rod 7. 413ci (6.8 liter) max wedge v8. the first version of chrysler’s raised block or rb design, the 413 was, for a time, the most powerful motor in the mopar lineup. introduced in 1959, the 413 made its initial appearance in chrysler’s new yorker, imperial, and 300 series, where it stayed until 1964. It came with two compression ratios and horsepower, 11.0:1 c.r. (410 h.p.) and 13.5:1 c.r. (420 h.p.). the engine has 2×4 bbl carburetors on a cross ram intake manifold, 2.08″ intake valves and 1.88″ exhaust valves. the cam lift is .509″ and has a 300° duration. the 413 max wedge engine redline is 6,500 rpm. the chrysler engineers. You need to do a little more reading about mopar engines before you tear into one, the 413 is basically identical to the 440 except for the bore size, heads included. the wedge engines were the 361, 383, 413, 426 and 440. the 426 hemi was derived from the 426 wedge in '64. there was also a 350 cubic inch motor in that line up of old mopar engines. Max wedge motors delivered more than 400 horsepower and roughly 500 lb ft of torque. a plymouth savoy with a max wedge was the first factory stock car to run a quarter mile in less than 12 seconds.
The Magnificent Mopar 413 And 426 Max Wedge Engines You need to do a little more reading about mopar engines before you tear into one, the 413 is basically identical to the 440 except for the bore size, heads included. the wedge engines were the 361, 383, 413, 426 and 440. the 426 hemi was derived from the 426 wedge in '64. there was also a 350 cubic inch motor in that line up of old mopar engines. Max wedge motors delivered more than 400 horsepower and roughly 500 lb ft of torque. a plymouth savoy with a max wedge was the first factory stock car to run a quarter mile in less than 12 seconds. No motors were ever named "stage 1." 1963 engines were available in 415 and 425 horsepower versions. 1964 was the final year of the max wedge option. the engine for the third year was named the "stage iii." max wedge cars equipped with four speed transmissions were only produced in the final year, as prior to that point chrysler did not have a. However, chrysler offered an even more powerful version of the 413 v8, the max wedge. the 413 max wedge was a drag oriented but street legal engine with an impressive 410 horsepower and 470 lb ft.
413 Max Wedge Intake 843551 413 Max Wedge Intake No motors were ever named "stage 1." 1963 engines were available in 415 and 425 horsepower versions. 1964 was the final year of the max wedge option. the engine for the third year was named the "stage iii." max wedge cars equipped with four speed transmissions were only produced in the final year, as prior to that point chrysler did not have a. However, chrysler offered an even more powerful version of the 413 v8, the max wedge. the 413 max wedge was a drag oriented but street legal engine with an impressive 410 horsepower and 470 lb ft.
Comments are closed.