Assembling A Tape Pancake Onto Flanges Youtube How to assemble a tape pancake onto flanges. Starlight g recording talks about how to load a pancake and installed reel flanges on a half inch reel to reel recording tape***soundtrack by gerard stroh***.
How To Load A Pancake And Install Reel Flanges On A Half Inch Recording How to load a pancake onto a reel. the first way is to take the 2 flanges apart and load the pancake that way. now what if your reel is plastic or the bolt p. Begin by setting the other flange back over the tape and lining up all of the cutouts and screw holes. then drop one of the phillips screws back in one of the screw holes and locking it in on the other side with a flathead socket and screw back together for each of the three holes. The first step will be to separate the flanges from the reel. there are three screws holding the flanges to a single hub. if you are using an un tampered reel (or one that has been properly assembled), the phillips screws should all be on one side and the flat heads on the opposite side. 1) disassemble a 10.5" take up reel and reassemble it with the pancake inside. 2) using a second empty take up reel spool 1 2 the tape onto it (see hint below) 3) cut tape in the middle. 4) remove one of the 10.5" spools and replace it with an empty 7" reel. 5) play the tape onto the 7" reel for a smooth packing or ff to get it done.
Position Pancake Flange Youtube The first step will be to separate the flanges from the reel. there are three screws holding the flanges to a single hub. if you are using an un tampered reel (or one that has been properly assembled), the phillips screws should all be on one side and the flat heads on the opposite side. 1) disassemble a 10.5" take up reel and reassemble it with the pancake inside. 2) using a second empty take up reel spool 1 2 the tape onto it (see hint below) 3) cut tape in the middle. 4) remove one of the 10.5" spools and replace it with an empty 7" reel. 5) play the tape onto the 7" reel for a smooth packing or ff to get it done. May 30, 2021. #2. the second image shows what is called a pancake. the easiest way to use one is to get a metal 10.5 inch reel, dissasemble the reel flanges (sides) from the hub, and carefully re assemble the flanges onto the pancake's hub. i have a feeling there are some who have tried to put a pancake onto a tape deck, and spool it onto. Unscrew the three bolts that hold the metal flanges to the plastic centre. don't lose the three parts that they screw into. then carefully lie the pancake onto one of the metal flanges and put the other on top, lining up the holes. reinsert the bolts and screw them into the retaining nuts that you took out.
How To Load A Pancake Tape Onto A Reel Youtube May 30, 2021. #2. the second image shows what is called a pancake. the easiest way to use one is to get a metal 10.5 inch reel, dissasemble the reel flanges (sides) from the hub, and carefully re assemble the flanges onto the pancake's hub. i have a feeling there are some who have tried to put a pancake onto a tape deck, and spool it onto. Unscrew the three bolts that hold the metal flanges to the plastic centre. don't lose the three parts that they screw into. then carefully lie the pancake onto one of the metal flanges and put the other on top, lining up the holes. reinsert the bolts and screw them into the retaining nuts that you took out.
Putting The Rest Of The 5000 Pancake Tape Onto Another Fresh Reel
Comments are closed.