Aquarise Pressure Temperature Ratings Youtube Aquarise technical manual. aquarise® is a thermoplastic piping system designed for the distribution of potable (drinking) water in combustible or non combustible buildings. pipe and fittings are manufactured in sizes 1 2” through 4” diameter using a specially formulated cpvc compound (temprite® technology). this manual provides installers. • follow aquarise recommended cure times before pressure testing • slowly fill piping system with water and bleed the air from the system before pressure testing • use water hammer arrestors • aquarise sdr 11 may only be used for hot and cold potable water distribution • aquarise sdr 21 may only be used for cold potable.
Technical Specifications Achech Valves Uk Uk Based Flow Control † follow aquarise recommended cure times before pressure testing † slowly fill piping system with water and bleed the air from the system before pressure testing † use water hammer arrestors † aquarise may only be used for hot and cold potable water distribution † allow for movement due to expansion and contraction don'ts. Compare to traditional metal systems and aquarise® proves itself a strong, highly engineered and affordable improvement over copper. long term performance. Aquarise ball valves are fitted with epdm o rings and a specially designed handle which doubles as a removal tool for easy maintenance if required. these valves range from 1 2" to 2" with a maximum pressure rating of 232 psi at 73of (1.6 mpa at 23oc). for sizes over 2", please contact ipex for valve options. Aquarise also boasts low maintenance performance, even in demanding hot water recirculation applications. hot and cold potable water systems provide a complete system of pipes, valves and fittings that are code compliant, offer ease of installation and simplified transitions. piping has been developed to sdr 11 and sdr 21 wall thickness.
Pressure And Temperature Ratings Aquarise ball valves are fitted with epdm o rings and a specially designed handle which doubles as a removal tool for easy maintenance if required. these valves range from 1 2" to 2" with a maximum pressure rating of 232 psi at 73of (1.6 mpa at 23oc). for sizes over 2", please contact ipex for valve options. Aquarise also boasts low maintenance performance, even in demanding hot water recirculation applications. hot and cold potable water systems provide a complete system of pipes, valves and fittings that are code compliant, offer ease of installation and simplified transitions. piping has been developed to sdr 11 and sdr 21 wall thickness. Pipe is made in 10 ft. lengths and is available in nominal sizes 1 2" – 4". all sizes have the same pressure rating while providing larger inside diameters than most potable water systems. maximum operating temperature of aquarise used in potable water piping system shall not exceed 160˚f. Aquarise sdr 21 provides a long term pressure rating of 200 psi at 23°c (73º f), sdr 11 aquarise fittings will be used. both sdr 11 and sdr 21 meet the requirements of csa b137.6, aquarise passes the punishing burst pressure tests conforming to astm f442. better long term performance.
Ansi Pressure Rating Chart Pipe is made in 10 ft. lengths and is available in nominal sizes 1 2" – 4". all sizes have the same pressure rating while providing larger inside diameters than most potable water systems. maximum operating temperature of aquarise used in potable water piping system shall not exceed 160˚f. Aquarise sdr 21 provides a long term pressure rating of 200 psi at 23°c (73º f), sdr 11 aquarise fittings will be used. both sdr 11 and sdr 21 meet the requirements of csa b137.6, aquarise passes the punishing burst pressure tests conforming to astm f442. better long term performance.
Comments are closed.