Applying Vinyl To A Tumbler So That S It S Always Straight Yeti Cup Weed off the extra vinyl. clean your tumbler with rubbing alcohol and let dry. apply transfer tape to your decal and scrape it down (do not remove paper backing yet!) position decal on tumbler and use a ruler if necessary to make sure it's straight. apply a strip of painter's tape down the middle of the decal. Once the bottom is in place i applied the rest of the vinyl design from the middle out toward the edges. the slight curve in the vinyl, the water line, and the snips in the transfer tape are all essential to helping put the vinyl on the cup straight. burnish the vinyl onto the tumbler and then peel away the transfer tape.
Step By Step Tutorial On Applying Vinyl To A Tumbler Ozark And Yeti Put your fingers around the center of the decal and place it on the tumbler. if you hold the decal taught, just the center will touch. don’t press down on it yet, just take a look to make sure you have it straight. in the video above, you can see i repositioned the decal once or twice until i was happy. 11. i folded the design over to the blue tape and cut off the backing. then, i pressed that section of the vinyl onto the mug. 12. then, i removed the rest of the transfer tape and pressed the rest of the design into place. 13. i removed the registrations marks and the mug was finished and the vinyl is perfectly straight. Applying the vinyl to the tumbler. clean the tumbler with rubbing alcohol to remove any oil from your skin. cut your vinyl as usual. (here’s a tutorial for using vinyl if you need it.) weed the excess vinyl. apply a piece of transfer tape to the vinyl design front. remove the vinyl backing. Firstly, permanent vinyl is a go to for most tumbler personalization projects. it boasts a strong adhesive that can withstand handwashing and the rigors of everyday use. this vinyl works best on smooth, hard surfaces such as stainless steel and glass tumblers, ensuring the decals stay in place over time.
Applying Vinyl To A Tumbler So That S It S Always Straight Vinyl Applying the vinyl to the tumbler. clean the tumbler with rubbing alcohol to remove any oil from your skin. cut your vinyl as usual. (here’s a tutorial for using vinyl if you need it.) weed the excess vinyl. apply a piece of transfer tape to the vinyl design front. remove the vinyl backing. Firstly, permanent vinyl is a go to for most tumbler personalization projects. it boasts a strong adhesive that can withstand handwashing and the rigors of everyday use. this vinyl works best on smooth, hard surfaces such as stainless steel and glass tumblers, ensuring the decals stay in place over time. First things first, let’s go over the supplies that you’ll need to put vinyl on a cup. diy mug supplies . mug, cup, or tumbler (stainless steel mugs, water bottles, and ceramic mugs work best) oracal 651 permanent vinyl – i get my vinyl from expressions vinyl. silhouette or cricut; cutting mat – (silhouette cricut) weeding hook and. Make sure the elbows are all facing the same direction. do this for both of the four way connectors. next take (2) of the 12″ long pieces of pvc pipe and insert them into two of the elbows. this will be the bottom of our cup and tumbler holder. then put the foam pipe insulation over the remaining two pieces of pvc pipe.
Comments are closed.