Access Control Installation Kintronics Run the wires. measure, align the lock and strike, and install the electric door locks. install the door reader. wire the door lock to the door reader. wire the door reader to the controller or the network if it is a reader controller. install the access control management software. test the credentials with one door. Simple access control system: this access control system is very easy to install. supports 125 khz, or 13.56 mhz smart card credentials, or mobile smartphone credentials. cloud based management software: the management software provides all the basic functions required by small to medium applications that don’t require special features.
Access Control Installation Kintronics The access control system is a set of devices that control physical access to a building, room, or other area. it consists of door readers, electric locks, a controller, credentials, and access control management software. its primary purpose is to allow access of authorized personnel and prevent unauthorized entry. Kintronics blog provides technical information about ip cameras, video management software (vms), network video software (nvr), pa over ip systems, door access control and other high technology products. The reader controller is connected to a network switch that includes poe. the pigtail on the back of the reader controller provides all the connections to the strike, rex, motion detector, door open sensor, and any other equipment required at the door. access control with electric strike. power (12vdc) is available from the reader controller. Door access control and how to configure the electric lock configuring the electric lock is an essential part of your access control system installation. the electric lock can be configured for fail safe or fail secure.
Access Control Installation Kintronics The reader controller is connected to a network switch that includes poe. the pigtail on the back of the reader controller provides all the connections to the strike, rex, motion detector, door open sensor, and any other equipment required at the door. access control with electric strike. power (12vdc) is available from the reader controller. Door access control and how to configure the electric lock configuring the electric lock is an essential part of your access control system installation. the electric lock can be configured for fail safe or fail secure. Kintronics blog provides technical information about ip cameras, video management software (vms), network video software (nvr), pa over ip systems, door access control and other high technology products. An access control system schematic diagram breaks the system down into its basic parts and provides an overview of how each part interacts with the other. it identifies all the components of the access control system, including the card readers, turnstiles, cameras, intercoms and biometric readers, as well as the wiring connections, ac power.
Comments are closed.